Smart Lock, Garage and Door Sensors | ePropertyCare Knowledge Base

This video explains how to setup codes for your smart lock: https://youtu.be/GEZPrHGRatk

1. Login to your account at www.building36.com.

This video will show you how to setup smart lock notifications and alerts: https://youtu.be/LA-nGkyoeqM

This shows how to perform pairing operations on the Yale family of smart locks.

First, to put hub into pairing mode, follow these…

You will need:

Phillips screwdriver
Four (4) non-rechargeable AA batteries

Directions:

1. Using a Philips screwdriver, remove the black battery cover…

To change the batteries of the Kwikset 888 smart deadbolt you'll need 4 AA batteries (no tools required).

1) Slide black plastic case upwards on…

This shows you how to change the batteries of the Kwikset 912 Smart Lever lock. Make sure this is your lock:

The ePropertyCare Connected Lock system allows a user to setup codes with a finite start date/time and end date/time. This is targeting AirBnB…

This video shows how to pair the Aeotec Z-wave door sensors to the Building36 cellular modem that is part of the ePropertyCare connected home…

The system can be configured to send alerts if a door/window is opened/closed, or left open for a programmable period of time. If you're out-of-…

This video shows how to install the Kwikset 888 smart lock hardware: https://youtu.be/oqafKET3QpI

The same instructions apply to other models from…

This article shows how to check the battery of your smart lock:

https://drive.google.com/file/d/1PrwzNYPwCIBjlUUaOgaP-IkNvj6pPzEJ/view?usp=sharing

This video shows you how to setup garage notifications for your ePropertyCare Connected Home system. You can setup alerts for when a garage is…

To replace batteries on the Aeotec Z-wave door sensors you'll need 2 AAA batteries.

Press button on the end of the larger casing to release…

A Z-Wave device needs to be within 30 feet open air of a repeating Z-Wave device. Any Z-Wave device that doesn't…